Measuring
To establish radii on an existing swimming pool, measure as you would for a cover.
- Mark points A & B approximately 10 feet from the pool and at least 10 feet apart.
- Mark the pool edge approximately every 2 feet unless there is a very sharp curve. If there is a very sharp curve measure about every 6 inches.
- Measure from points A & B to the pool edge marks and record measurements in a table.
- Send the table to the Creacon Company and we will figure the curves for you.
To measure corners on a pool, nail two long boards together to form a large square and measure as shown in the illustration on the right. In all cases the three measurements should be equal or close.
